概述

HXD - II航行信号灯控制板是一体嵌入式安装在驾驶台上。航行信号灯控制板主要用于船舶航行中对航行信号灯的监视和控制，表明船舶状况之用。HXD - II可测控18路航行信号灯并显示18路航行信号灯的开闭状态。一旦某个信号灯断丝或相应电缆断线时，操作显示面板上对应的LED指示灯即会闪光报警。按消声按钮，即可消声。可根据用户要求设定为闪光灯输出。

HXD - II航行灯控制器面板上具有调光按钮，可实现七级循环调节LED指示灯的亮度,确保在不干扰驾驶员夜间视觉的条件下易于看清信息。试灯功能点亮所有LED指示灯，可测试各个LED指示灯的工作情况。

技术参数

◇  通道…………………………………………………18路航行信号灯控制
◇  电源……………………………………………24VDC(18VDC-36VDC)
◇  通讯接口………………………………………………RS485接口(选件)
◇  操作温度………………………………………………………-15℃-55℃
◇  内部功耗………………………………………………………………10W
◇  继电器输出触点…………………………………………………DC24V/5A
◇  负载功率范围………………………………………………………5-60W
◇  相对湿度………………………………………5%至95%间，非冷凝状态
◇  外壳材料………………………………………………………………… 铝
◇  外壳颜色…………………………………………………………………黑色
◇  开孔尺寸…………………………………………284mm(L) X 138mm(W)
◇  外型尺寸…………………………………………310mmX150mmX80mm

Navigation light controller HXD – II

Overview

       Navigation light controller of HXD-II series is a embedded system on the bridge. Navigation light controller is mainly used for the monitoring and detecting the status of board when sailing. HXD-II can detect the status of 28 Navigation lights, once some wire or signal cable broken, the power operation lights will blink, the alarm will sound at the same time, and then you can press the silent-button to stop. The blink LED output can be modified as the customers’ requirement.

       The control board has dimmer buttons. Seven cycle regulator can achieve the brightness of LED lights, to ensure not interfere with driver vision at night. The Light test function can detect the status of the LED.

Technical parameters

Channel ……………………… 18 Road navigation signal control
Power……………………………………………24VDC (18VDC-36VDC)
Operating temperature …………………………………-15 ℃ -55 ℃
Internal power consumption…………………………………… 10W
Relay output contacts……………………………………… DC24V/5A
Load power range ………………………………………………… 5-60W
Relative humidity …………………… 5-95%, the non-condensing
Case Material …………………………………………………………… Al
Case Color …………………………………………………………… Black
Hole size …………………………………… 284mm (L) X 138mm (W)
Dimensions………………………………… 310mmX150mmX80mm