概述

HXD - III航行信号灯模块是组合式的航行信号灯控制器。HXD - III航行信号灯模块由操作面板和若干航行信号灯控制模块组成，每一个控制模块可以控制4路航行信号灯开闭状态。一旦某个信号灯断丝或相应电缆断线时，操作显示面板上对应的LED指示灯即会闪光报警。按消声按钮，即可消声。

HXD -III 航行灯控制器面板上具有调光和试灯功能，是替代用户使用继电器和闪光器接线方式组成航行信号控制的理想新产品，可根据用户的需要设定为闪光灯的监视和控制。

技术参数

⊕ 通道………………………………………………………4*N路航行信号灯控制
⊕工作电源…………………………………………………24VDC(10VDC-36VDC)
⊕控制电源……………………………………………………24VDC或220VAC
⊕操作温度………………………………………………………………-15℃-55℃
⊕内部功耗………………………………………………………………………10W
⊕继电器输出触点…………………………………………DC24V/5A 或AC220V
⊕负载功率范围………………………………………………………………5-60W
⊕相对湿度……………………………………………5%至95%间，非冷凝状态
⊕面板材料…………………………………………………………………………铝
⊕面板颜色………………………………………………………………………黑色
⊕模块材料………………………………………………………………………ABS
⊕模块颜色………………………………………………………………………绿色

Overview

Navigation light controller of HXD-II series is a combined Navigation light controller. It consists of one display model and several connection units. HXD-III can detect the status of 4 Navigation lights. Once some wire or signal cable broken, the power operation lights will blink, the alarm will sound at the same time, then you can press the silent-button to stop.

Technical parameters

Channel……………………………………………4 * N Road Navigation Light Control
Power supply………………………………………………… 24VDC (10VDC-36VDC)
Control power……………………………………………………………24VDC or 220VAC
Operating temperature……………………………………………………… -15 ℃ -55 ℃
Internal power consumption………………………………………………………… 10W
Relay output contacts ……………………………………………DC24V/5A or AC220V
Load power range …………………………………………………………………… 5-60W
Relative humidity ………………………………………… 5-95%, the non-condensing
Panel Materials …………………………………………………………………………… Al
Panel Color ……………………………………………………………………………… Black
Module Materials ……………………………………………………………………………ABS
Module Color………………………………………………………………………………Green